Re: 1958 SWB C4 Fleetline - NZ Build
So I decided to start on the front C4 install again now I've primered the cab.
I started by bolting the front end together with about 6-8 bolts and mounted it up to the cab.
Then I spent about 3hrs moving it forwards and backwards to try different wheel arch locations. Basically on the 58-59 the noted 27.5" is to far forward though it would work.
If I moved it back 2.25" (the extra length over the 55-57 chassis) it was sitting slightly towards the rear.
In the end I settled on 28-3/4" from the front of the rail.
What do you think....
|