Quote:
Originally Posted by Palf70Step
1988-94 (in this case a 90) Bench. Outer front factory holes line up with the 90's bracket. Drill new hole for rear and add a 7/8" spacer (I used a 1" to 3/4" pipe adapter) and reinforce the floor. I also used the 90's seat belts and if the tank is out all the factory seat belt holes work with the new belts.
|
In what position would the bottom bracket need to be to give you the most leg room with this exact sea, regardless of bolting holes. Closes to the tank or closes to fire wall where seat can slide back?? Thanks