Quote:
|
Originally Posted by case_bt
Its a toss up between the xe268 or xe274 it says to have a 2200 rpm stall on the 274 is it possible to run with a stock converter
|
You will be happier with the xe268 in a 350, the xe274 would be a little better in a 383 or 400, I haven't heard of to many guys complaining about the xe268. if you have around 9.5cr that will perfect for the xe268 but might be a little low for the xe274 in a 350 plus to take advantage you this cam you would also need some low gears, probally in the line of 4.33's or 4.56's for it to operate descently.
__________________
1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears
1948 Chevy FleetMaster Coupe, LS1, (almost done)
1950 Chevy StyleLine Coupe 250/6 3x2 Dueces
2009 Toyota Tundra
1996 Harley RoadKing
"I maybe getting old, but I can still burn rubber with the best of them"
|