The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

HUSSEY · 02-18-2016, 10:04 PM

It definitely worked out well...couple more pics.

I learned that if you keep the bar parallel to the outside of the running board, then your two mounts can be of the same length...this ended up working out by dumb luck for me. My forward mount is mounted just behind the splice on the frame, nice flat spot. The rearward mount is forward of the rear of the cab.

You can see I had to clamp the running boards down to my welding bench because they were warped so bad.

02-18-2016, 10:04 PM	#9
HUSSEY Registered User Join Date: May 2013 Location: Kansas City Posts: 572	Re: Ad running boards on S10 frame It definitely worked out well...couple more pics. I learned that if you keep the bar parallel to the outside of the running board, then your two mounts can be of the same length...this ended up working out by dumb luck for me. My forward mount is mounted just behind the splice on the frame, nice flat spot. The rearward mount is forward of the rear of the cab. You can see I had to clamp the running boards down to my welding bench because they were warped so bad. __________________ My 49 AD Build / S10 Chassis -- Thread -- Pictures -- S10 Conversion Mounts Last edited by HUSSEY; 02-22-2016 at 02:53 PM.