Quote:
Originally Posted by Lost81c10
So which hole is the best one to use from each head to attach the chains to lift the engine and which bolts do I use. I don't want to damage heads or bolts that I will be needing again.
If there are better spots please let me know. the plan is for Engine and Trans to come out together.
|
I used the left most bolt in your picture and it worked fine with the engine and trans together. I'm pretty sure any of those would work. Just a choice on how the chain will lay when installed. I just found a bolt out of the many I had removed in getting that far that fit.
On the opposite corner was a black lifting bracket that didn't have any holes but had a wedge-shaped piece that I wrapped the chain around and put a bolt through the links.