The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**John Fabris** · 11-22-2005, 09:51 PM

Hi All,

A while back I posted about using Ssnake-Oyl's service to have my 1967 seatbelts restored.

Well, here is a before picture. (NOTE this picture was of the best of the three belts that I had, the other two belts had rusty hardware and frayed webbing.)
The next two are after pictures. I am pretty stoked about the way they turned out. They sent me some color samples (webbing) and asked which color I wanted, and also what level of restoration I wanted. (I chose to reuse existing lables, which they cleaned, I chose new webbing, rechrome the buckle bottoms and anchors, and repaint the buckles.) Not Cheap $300, but I am very happy...

11-22-2005, 09:51 PM	#1
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Restored 1967 Chevy Seatbelts Hi All, A while back I posted about using Ssnake-Oyl's service to have my 1967 seatbelts restored. Well, here is a before picture. (NOTE this picture was of the best of the three belts that I had, the other two belts had rusty hardware and frayed webbing.) The next two are after pictures. I am pretty stoked about the way they turned out. They sent me some color samples (webbing) and asked which color I wanted, and also what level of restoration I wanted. (I chose to reuse existing lables, which they cleaned, I chose new webbing, rechrome the buckle bottoms and anchors, and repaint the buckles.) Not Cheap $300, but I am very happy... __________________ John Fabris 67 C10 SWB Last edited by John Fabris; 11-22-2005 at 11:01 PM.