The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Destroyed Thrust Bearing in Newly Built 327

clockdoc · 12-06-2018, 12:46 AM

Heads are Edelbrock E-Street aluminum heads (2.02/1.60)-- 64cc. I will be using the Edelbrock 7102 flat-tappet cam and lifters lift:.488/.510 -- duration:308/318. Also using roller rockers from Howard Cams. Edelbrock 2703 intake and 1406 carburetor. Long-tube Flowtech headers. The new engine comes without cam and with a fuel pump boss. The transmission should get to the trans shop this weekend. Keeping my fingers crossed. Expensive but, hopefully better than having to go through this again. It's gotten to be personal at this point. Thank you for your interest.

12-06-2018, 12:46 AM	#19
clockdoc Registered User Join Date: Feb 2016 Location: Glen Allen, VA Posts: 67	Re: Destroyed Thrust Bearing in Newly Built 327 Heads are Edelbrock E-Street aluminum heads (2.02/1.60)-- 64cc. I will be using the Edelbrock 7102 flat-tappet cam and lifters lift:.488/.510 -- duration:308/318. Also using roller rockers from Howard Cams. Edelbrock 2703 intake and 1406 carburetor. Long-tube Flowtech headers. The new engine comes without cam and with a fuel pump boss. The transmission should get to the trans shop this weekend. Keeping my fingers crossed. Expensive but, hopefully better than having to go through this again. It's gotten to be personal at this point. Thank you for your interest.