Quote:
Originally Posted by Coursey
I'm at a loss on this thing.
I filled out the form for billet spec wheels and sent it to newstalgia wheel. They told me 6.5 and 6.75" bs. So i confirmed this with the wheelrite tool. This put me approx 3/8-1/5" away from the finder lip (they have not been rolled yet).
I used a belltech spindle (which was not supposed to push the front according to belltech) It changed the track width from 63.6 to 64.75. I used a little shop brake kit on the rear which added about .25 to both sides.
I used the dimensions for a 255/35 and a 295/35 Nitto NT555 tire.
|
Yeah that's does seem like a lot especially on the front. I'm not saying they are wrong but if anything I would get something in writing that states if they don't fit you can return them because I know all custom built Billet wheels normally are non returnable.