Re: S10 Swap how to
Sorry it's been awhile. I was 4 wheeling my way across the mid-west. I just finished up the promised motor mounts today. I also managed to mock up a 350, without cutting the firewall, using stock Malibu exhaust manifolds, and a mechanical fuel pump.
First I cut some 1" O.D. 11ga tube to fit inside the S10 4.3 motor mounts (I put new ones on every build). Then 1/2" x 4" bolts and lock nuts. I bolt the tube on the motor mount, then mock the motor up where I'm happy. Next I use posterboard to template my "legs". Then I trace them on 1/4" sheet, and cut them out. Once it's all mocked up and I'm happy with the placement, I tack them in (several places) and pull the driveline to seam weld the mounts.
|