[sweetk30]

dinner break . now digesting the food before more work .

stuff i got done today :
AGR box bolted on for good with a ORD bolt on brace kit .
p/s pump pulley pressed on .
return line from box to pump installed .
ORD sway bar disconnects re-bushed / greased / installed .
sway bar re-bushed with ORD kit / greased / installed .

had to drop off my plow pump drive pulley and crank pulley to the machinist . need a bushing made to have the center boss up-sized to register in the serp belt crank pulley . this plow pump pulley was from the older style engines and smaller center hole in the crank pulley . easy to whip out and told him make it tight so its a press fit on the plow pump pulley but snug on the crank one .

one of the last things i need to do on the suspension is change the worn out bushings on the lift springs upfront then its done .