|
Re: S10 Swap how to
dont cut the frame at the joint, cut off the last 11" of the frame and flip it over, then cut/drill out the rivets for the front leaf hangers and move them back 8". this moves the axle back 8" and makes the wheelbase perfect. it also moves the front perch up slightly along the frame which lowers the truck about an inch for free. make sure you move the front perch 8" straight back, not 8 inches diagonally up the frame, which would be slightly less than 8" straight back. but its super easy, should only take an hour or so to do.
I learned this from 62chevy on here, he has the pictures of how to do it on his build. it works PERFECTLY, there are no downsides, I did it on my shortbed s10 chassis under my 65 swap before the back half.
|