[badone07]

I can see that your electric choke is disconnected. It's the grey plug, attached to the light blue wire. The pcv hose (wheel stud plugging it), think you marked as rev.12. should go to pcv valve. BTW, that pcv valve looks incorrect. Probably would be a 2 port, like the one in your hose routing photo. The port that is presently attached to the pcv goes to the charcoal cannister. Which looks like the black/white stripped line, as in your emission hose routing photo.

***Your 05 to B in the photo below. Your 03 to A in photo below. Your 12 to B. Connect C to D. Actually all the different windows that have to be opened up, made helping a lot more difficult. I'll look again later.