Re: SBC Alu Heads Designed for Torque
Marvin,
Thanks for your information. A little follow up on the " AFR 180cc standard 23° / standard SBC intake configuraton ". Considering this head, if I read your description correct, this is a strong lower RPM torque head, one of the better ones. Do you have specific part number for the AFR 180. Do you suggest the smaller 1.94 valve too.
Definitely will do the hydraulic roller, question is finding one more designed for torque vs RPM HP. The smaller COMP 4x4 rollers are still pretty big cams, at least the ones I have seen.
thanks,
Les
|