The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

phantom dually · 05-30-2005, 10:38 PM

Here are a few progress pics from the long weekend. Finished priming and painting the rest of the frame. Got the upper and lower arms on the front. Also got the Belltech 3" coils in the front as well as the DJM 2" spindles. And dont forget the DOESTECH shock up front. Hope to make little more progress through out the week. I feel that alot of the hard work is done, so everything else should be straight forward from here. Time to start cutting on the bed. I want to get this thing on the road when the wheels are here in roughly 6-7 weeks from this post.

05-30-2005, 10:38 PM	#62
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Here are a few progress pics from the long weekend. Finished priming and painting the rest of the frame. Got the upper and lower arms on the front. Also got the Belltech 3" coils in the front as well as the DJM 2" spindles. And dont forget the DOESTECH shock up front. Hope to make little more progress through out the week. I feel that alot of the hard work is done, so everything else should be straight forward from here. Time to start cutting on the bed. I want to get this thing on the road when the wheels are here in roughly 6-7 weeks from this post. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448