The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - ***Dream Truck Build*** 72 swb fleet with a cummins and one tons

obijuan · 08-21-2012, 10:46 AM

if i were you id remove the steering block on the driver side knuckle. those studs tend to shear, and there is a better alternative out there. instead of that, ive used a dropped 4x4 pitman arm coming off the box. 90% sure its sold by superlift. its basically the stock one with a few inches drop.

08-21-2012, 10:46 AM	#36
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: Dream Truck Build 72 swb fleet with a cummins and one tons if i were you id remove the steering block on the driver side knuckle. those studs tend to shear, and there is a better alternative out there. instead of that, ive used a dropped 4x4 pitman arm coming off the box. 90% sure its sold by superlift. its basically the stock one with a few inches drop.