Re: 63 c10, installing a LS engine
well word to the wise, the Performance On Line LS cross member and transmission mount will not work when installing a 2002 4L80-E transmission. As you can see in the pics I had to use 5/8" spacers to get the casting and bolts to stay high enough so that they didn't touch the tube. I also had to elongate the LS adjustable motor mount plates by 3/4". The issue I had was that the coil pack on the passenger side was about 1/4" from the fire wall and felt this was too close. I made the parts work but would do a little more research the next time.
|