[jbclassix]

Next I installed the detent balls with the shift rails in Neutral, then the springs and then the caps. I don't have a torque spec for these







Then I installed the expansion plugs with a little sealant on them.



Next I installed the shift bar. Notice that on this type of linkage, the slotted hole goes to the 2-4 rail, and the holes are to the rear



Next I installed the linkage



Then the PTO cover with gasket and bolts. I don't have a torque spec, but the threads do need sealant



Then the speedo drive shaft and adapter. I don't have a torque for this