[Jaysonb]

Now it's time to re-hang the door, and put the front fender on to see how things fit. The last 3 or 4 sets of rockers i have done, have been stamped kind of funny, sort of smiley face shaped when you look at the bottom door gap, and they have also left me with a big gap between the rocker and fender. I have bought them from diffrent vendors, ordered some in town here, and everything I find is the same. So this is what I have come up with to make the fit acceptable. The front edge of the rocker got a vertical slice, and the end moved forward about 1/4" to close up the big gap from the fender to rocker, and when you move the front forward, it also comes out a little, fixing the leading edge of the smiley face at the same time as closing the gap. To fix the rear end what I have done is sliced along the length of the rocker, and down next to the cab corner, closed the door, and moved it to make the bottom door gap even. It is a bunch of work, but worth it in the long run.