Re: Matt's 74 Bronco
Pic #1. I worked on the chassis a bit, I had to replace the body mount area in the back of the frame (rotted out) So I made new plates to be welded in.
Pic #2. The finished project. Sorry for no before shot, must have forgot!!
Pic #3. This Was as I was getting ready to cut the back half off the truck to see if I could use the tail light, upper post and the lower cross sill.
Pic #4. Well after it was cut out it revealed some more rot.
Pic #5. And some more, so the customer decided to order the pieces needed and will continue when they show up.
Mark...
|