The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Roadmarks · 03-15-2011, 08:59 PM

What Panel Deland said! What I would do , however is to hit a local salvage yard and pick up a nice HEI for cheap and toss the point set-up all together. That one change alone will make more difference than you will believe. HEI is THE way to go. 1976 up Chevy car or truck L6 is where you get the distributor. New plug wires and plugs for HEI set to .045. Then look over the gaskets on the intake /exhaust and you'll be good to go!

Later,

Les

03-15-2011, 08:59 PM	#16
Roadmarks Registered User Join Date: Apr 2010 Location: Raleigh NC Posts: 157	Re: 250 straight six starving? What Panel Deland said! What I would do , however is to hit a local salvage yard and pick up a nice HEI for cheap and toss the point set-up all together. That one change alone will make more difference than you will believe. HEI is THE way to go. 1976 up Chevy car or truck L6 is where you get the distributor. New plug wires and plugs for HEI set to .045. Then look over the gaskets on the intake /exhaust and you'll be good to go! Later, Les