|
Re: 700R4 build thread.
Replace the rear Case Bushing, Knock it out from the rear of case, Install from the front, Not that 700R4's are bad about Case Bushing walk-out like a TH400/4L80E. But procedure is procedure. I use my camshaft bearing installer handle to drive the Bushing Installer & Bushing. I use a Seal/Bearing tool to drive it out.
If ever in doubt, Measure the depth of the Bushing before removal.
Didn't get a pic of my installer, But how many people have a Cam Bearing knocker handle?
|