12-03-2019, 10:24 AM
|
#29
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Where do I cut this fender?
Quote:
Originally Posted by landarts
Here is how I recently did this about two weeks ago on the 68 Second Chance Build. Had to add additional 1/2 of material on both sides of fender cup. One of the things I did that made it easier to work on was tack weld a small temporary piece of metal on the bottom so that it would not twist or change in size. You can see it in the first two photos. |
This is what I'm thinking I'll do. Looks to be the easiest way and simpliest way of adding the patch.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|