The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - My 1961 crew cab- XRMYCRU

**aerotruk63** · 11-07-2014, 07:32 AM

If you were to cut a 2" square tube with an oxyacetylene torch, would the separated pieces not twist or warp?

The inner rocker piece they fabricated, is it not thicker than the stock inner rockers of the donator's? Seems a continuous inner rocker from front to back would structurally be desired, to enforce the center post between the two cab supports at the dog legs?

11-07-2014, 07:32 AM	#86
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: My 1961 crew cab- XRMYCRU If you were to cut a 2" square tube with an oxyacetylene torch, would the separated pieces not twist or warp? The inner rocker piece they fabricated, is it not thicker than the stock inner rockers of the donator's? Seems a continuous inner rocker from front to back would structurally be desired, to enforce the center post between the two cab supports at the dog legs? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 11-07-2014 at 07:38 AM.