The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**PGSigns** · 02-26-2018, 07:36 AM

You can see from the lower ball joint angle some thing is amiss. 5 degrees of caster put the upper ball joint about 3/4" behind the lower. You can take a quick measurement and see about what you have. The picture is not shot to show the angle well if you look at the frame. I would set the truck level on stands and take another look at what you have.
Jimmy

02-26-2018, 07:36 AM	#9
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Spindle sitting at a angle. Porterbuilt You can see from the lower ball joint angle some thing is amiss. 5 degrees of caster put the upper ball joint about 3/4" behind the lower. You can take a quick measurement and see about what you have. The picture is not shot to show the angle well if you look at the frame. I would set the truck level on stands and take another look at what you have. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic