The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Turn Signal Switch Replacement. Help with wires through column.

Jstock85 · 09-29-2017, 08:26 AM

I replaced mine on 85 c10 a few months back and ill tell you first its not simple! I took the steering column apart all the way to the bracket holding it up close to the pedals. Unsnap the switch connector and slide it out from the top. There was some kind of plastic sleeve holding all the wires tight to the column. Loosen that by hand and slide the connector down from the top of the column. Reinstall column in reverse order. Its not easy bro! Take your time!!

09-29-2017, 08:26 AM	#2
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Turn Signal Switch Replacement. Help with wires through column. I replaced mine on 85 c10 a few months back and ill tell you first its not simple! I took the steering column apart all the way to the bracket holding it up close to the pedals. Unsnap the switch connector and slide it out from the top. There was some kind of plastic sleeve holding all the wires tight to the column. Loosen that by hand and slide the connector down from the top of the column. Reinstall column in reverse order. Its not easy bro! Take your time!!