The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kamikazekyle05 · 09-21-2014, 03:28 PM

So next up is the motor. I found a low mileage 5.3l and a 4l80e. The 5.3l already had a set of beehives spring in it and a ls6 cam. I opted for a little bit bigger cam so i bought a vinci trucker cam. I also ordered a Transgo HD-2 shift kit and a Circle D 3200 stall. after everything was installed a put some left over POR-15 black paint on the tranny and some hugger orange POR-15 on the engine block. I Have some aluminum paint for the heads and accessory brackets but haven't got to that yet.

09-21-2014, 03:28 PM	#4
kamikazekyle05 Registered User Join Date: Nov 2007 Location: Vernon, Texas Posts: 331	Re: Project "Ron Burgundy" 67 c10 5.3 So next up is the motor. I found a low mileage 5.3l and a 4l80e. The 5.3l already had a set of beehives spring in it and a ls6 cam. I opted for a little bit bigger cam so i bought a vinci trucker cam. I also ordered a Transgo HD-2 shift kit and a Circle D 3200 stall. after everything was installed a put some left over POR-15 black paint on the tranny and some hugger orange POR-15 on the engine block. I Have some aluminum paint for the heads and accessory brackets but haven't got to that yet.