The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Cooper197 · 04-20-2018, 02:24 PM

Only 6.7 on the rear tail light circuit.

I have an LED flasher hooked up. I had the LED's before and the correct flasher for them. Blinkers work and flash at the correct speed, the only issue is that they will flicker if the truck is at idle.

I just had an idea that actually could be much of my issue...
The headlight switch was a cheap Autozone one. Often the dash lights will kick off and I'll have to reach under the dash and lightly hit the bottom of the switch for them to come back on. I suppose I could be having the exact same thing happening with my tail lights. I'll have to check what my output voltage from that switch is

04-20-2018, 02:24 PM	#13
Cooper197 Registered User Join Date: Jul 2014 Location: Eugene, Oregon Posts: 199	Re: Tail Light Issue Only 6.7 on the rear tail light circuit. I have an LED flasher hooked up. I had the LED's before and the correct flasher for them. Blinkers work and flash at the correct speed, the only issue is that they will flicker if the truck is at idle. I just had an idea that actually could be much of my issue... The headlight switch was a cheap Autozone one. Often the dash lights will kick off and I'll have to reach under the dash and lightly hit the bottom of the switch for them to come back on. I suppose I could be having the exact same thing happening with my tail lights. I'll have to check what my output voltage from that switch is