Quote:
Originally Posted by hotwls13
Easiest way to accomplish stripping the whole door???
|
Sandblast is easiest...80 grit on a DA is doable and far cheaper.
If you are down to primer and it's hard as hell to get off, then leave it on there. A tightly adhered coating is a good substrate for paint. If you see rusty area through the primer, then keep sanding and recoat bare steel with epoxy primer. Real 2K epoxy primer... not cheap rattle can crap.
These guys make a 2K aerosol and some companies like Eastwood relabel it.
http://www.spraymax.com/en-us/produc...poxy-primer-1/