Quote:
Originally Posted by tlorber
I started out with 4" lowering blocks. The bump stop bracket would hit the axle when I hit bumps or deep swales at speed so I cut them down to around 3". Now they are fine. Another thing to consider is your wheel size. Those look like stock size wheels (15" I presume). Larger wheels/tires will fill up the bay and make the bed look closer to wheel since there will not be as much space in between.
|
Good point on the wheel size. I was more concerned of the gap distance to the ground. I thought if I used a smaller wheel size it would help keep things lower all around to start.