|
Re: Help me troubleshoot my temp gauge please!
OK, so I took the circuit board / resistor all apart and cleaned the crap out of everything. Looked exactly like the picture posted, everything in place, nothing obviously suspect. I still get the exact same ohm readings after cleaning everything.
My resistor has that red rectangle on it. I noticed that the resistor on the gas gauge looked the same. The ohms across the gas gauge resistor terminals is ~49. But across my temp resistor they are ~209.
209 sounds high with what everyone here has said. Does anyone know where I can buy a new resistor?
Should I try swapping the one from the gas gauge over and see if it makes the temp gauge work?
|