|
Re: Need PorterBuild Mild/Touring LS Steering HELP
Quote:
Originally Posted by Chvy2NV
Hey guys. I’m mocking up some parts here and it seems my steering is going to be really tight. Just wondering what you guys with this setup Are using and how’s you do it.
From what I’ve researched it appears Im going to need a 30” column and 3 joints to get the proper angles. Also some guys mention an idler bearing as well. Im running a Pb drop member with LS and Holley manifolds
Any thoughts.?
Thank you in advance ..
Posted via Mobile Device
|
The 'idler' bearing is required when more than 2-joints are used. Without it, the shafts will not be held to a specific path since the joints can flex in their rotation.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|