|
Re: s10 swap rear wheel/bed alignment issue
longbed s10 wheelbase is 118", AD shortbed wheelbase is 116"
that said, it looks like its only about an inch off center, 6" is a half a foot, and no way is that half a foot off.
the AD front wheel is slightly back in the wheel arch from the factory so most s10 swaps account for that and move the cab back an inch. also, lowered s10s move the front wheel back in the front wheel arch so most people compensate another 1/2 inch or so for that.
it looks like in other pictures you have the front wheel set correctly, so maybe scoot the bed back a 1/2", the fender will easily move that much to meet the running board and apron. guys focus on the bed to cab gap too much, remember that the back of the cab is curved and the front of the bed is flat, so any gap will be accentuated.
there are also axle setback plates sold by jagsthat run that move the axle back 1/2", you can flip them and move the axle forward that 1/2"
|