|
Re: Let's Build A 1 Ton Crew Cab 4x4
Quote:
Originally Posted by MTCK
Pretty sure on this gen truck all the mounts are in the same spot. I couldn't get my used 350 back in last time on my crew and it looked about the same. I had just put the poly guts in my clamshells and got it home by doing the following: loosen the clamshell to crossmember bolts, both sides; drop the motorin and massage both clamshells with a bfh until it drops in, marries up to the trans and you can get bolts in both motor mounts; tighten the clamshell to crossmember hardware. Can't recall if I had to pull the motor back out for the last step. I recall the fit looked about as hopeless as yours until I backed those bolts off.
|
Yeah that seems to be quite a few people's opinion. That is should fit I just need to move the rubber mount inside the clamshell some.
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
|