[OKGMC4]

Been a busy few months with just a little extra time...worked on gaps on the doors and fenders and trying to get a new bed floor in. This bed is off an 89-96 Dakota. The Dakota bed is 78 3/8 long and I need 77 3/8, I just cut the extra inch off the front end. That put the center of the wheel well around 37", exactly where it needs to be on a TF truck. The measurements for the TF I came up with are 77 3/8 long by 50 1/8 wide. Looks like I'll be cutting the third rail back where it conflicts with my underbed tank, and reusing one of the stock rails.