[undertaker72]

Originally Posted by landarts

Here is the other side of the passenger door rust repair also with first round of filler. One more round here and i will add the seam sealer and prep for paint. Other side removed door for last time to make an adjustment to front of rocker and finish tacking in with welds. This is right after I finished grinding down welds and getting ready to add filler where needed. Last picture is with the cowl removed and all the debris vacuumed out, looks really good in there no sign of rust. I also remove it to try and straight out the antenna hole a little better with a hammer and dolly before i put it back on.

Running total so far for the truck expenses:
-purchase price $1100
-starter $59
-rag joint $23
-parts ordered $402
--inner rocker/outer floor x2, rockers x2, sill plates x2, lower door skin, front cab support x2, fuel sender, shifter knob, armrest x2, dash pad, heater control switch, rear light kit
-Wheel dollies (tool purchase will not add to total since I will keep) $97
-new 3-way valve for aux. tank with fittings $28
-pvc valve and oil fill cap $16
-radiator $129
-passenger fender $60
-paint and prep supplies at Napa auto (1qt. of copper poly 522 and 1qt. of white 521 plus seam sealer and misc items) $123

TOTAL $1940

nice work, its coming together really nice