Quote:
Originally Posted by Notch1988
The rivets are quite large, you won't need to drill out the holes, they'll fit a big bolt. Easiest way to get them out, IMO, is I cut the head off with a 3/32 disc and grind the surface smooth. You'll see the round outline of the hole/rivet, just take a center punch and BFH and pound it out from there.
I had my frame blasted then tore it down further, will get it redone again before coating.
|
It appears you have a much nicer work area than myself! I've had some experience grinding rivets, I'm not excited about it, but plan to start tomorrow.
