Quote:
Originally Posted by NorCalGal
I'm going to use the drivers side wheel well for my headlight harness also, I'll hang my wires from the bolts that mate the inner and outer fender.
My a/c is hurricane air and the bulk head comes directly thru the original fan motor hole so I'll just go ahead and run them under the hood.
|
My Vintage Air system is the same as yours. If I had thought about it earlier I would have swapped the fittings so I could route the hoses thru the wheel well as solid axel did. I did manage to route my trans cooler lines thru there so that reduces the clutter a bit.