View Single Post
Old 09-18-2011, 10:51 AM   #4
Registered User
DavidB's Avatar
Join Date: Jun 2007
Location: South Carolina
Posts: 106
Re: 12 bolt rebuild + Eaton

The axles are held in by c clips. Start by removing pin bolt then sliding out pin.

The in keeps the axles from sliding in so the c-clips don't fall out so after removing pin push axles in and remove c-clips.

Then slide both axles out.

Last edited by augie; 02-16-2012 at 12:19 AM.
DavidB is offline