The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Could really use some transfer case help please

Ski-me · 10-24-2016, 11:44 AM

Agreed, I also did the switch the other way. Converted my cable speedo to an electric one.

You'll need just the rear tailshaft housing and speedo gear (and snap rings). Pretty easy swap other than the snap ring and having a strong enough snap ring pliers. You don't need to swap the shaft or anything else.

Sorry, I think I already threw away my cable housing....

I did a write-up on a conversion the other way with pics. This may help you out (provided the pics show up for you).

http://ck5.com/forums/threads/conver...p-pics.296187/

10-24-2016, 11:44 AM	#8
Ski-me Registered User Join Date: May 2012 Location: Colo Springs, CO Posts: 870	Re: Could really use some transfer case help please Agreed, I also did the switch the other way. Converted my cable speedo to an electric one. You'll need just the rear tailshaft housing and speedo gear (and snap rings). Pretty easy swap other than the snap ring and having a strong enough snap ring pliers. You don't need to swap the shaft or anything else. Sorry, I think I already threw away my cable housing.... I did a write-up on a conversion the other way with pics. This may help you out (provided the pics show up for you). http://ck5.com/forums/threads/conver...p-pics.296187/ __________________ - Jeff 89' K5 Blazer, 2.5" lift, 35" tires 04' GMC Yukon XL, 3/4 ton, 8.1L Last edited by Ski-me; 10-24-2016 at 11:56 AM.