Quote:
Originally Posted by Dirty_Hairy
I just picked up a 93 C1500 Sport and I wanted to lower it so I went with Belltech 2-3/4 lowering kit with the coil springs and I like the look but I think I want it lower, how can I put in a flip kit now that the springs have been lowered 4"? I assume a flip kit by itself gives you 6" and if it is already 4" with springs then 10" would be way too much. My original spring perches are a bit beat up from chiseling the rivets out and the truck came with 2" rear drop shackles so I do not have the factory ones.
Thanks for any input.
DH
|
You will need to buy new stock hangers (or spring perches) and stock shackles.
You can bolt the hangers on with grade 8 hardware similar to the lowering hangers. I took a 2/4 dropped truck down to 5/6 & used hangers from Rock Auto.
It should be a pretty simple part swapping process other than the c-notch need for the flip kit.
Are you planning on doing spindles up front at the same time to lower the front more too?