The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MP&C · 03-02-2017, 07:48 AM

Getting down to the nitty gritty on the seat brackets, number two is all but done, need to weld in three hex nuts and touch up some media blasting. Hoping for good weather this weekend so we can spray some epoxy primer on them and get these installed...

And the last two pipe clamps came in at Napa (installed with lock nuts), so we can now throw some air to the planishing hammer and try out the new fixture..

03-02-2017, 07:48 AM	#812
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,634	Re: 55 Wagon Progress Getting down to the nitty gritty on the seat brackets, number two is all but done, need to weld in three hex nuts and touch up some media blasting. Hoping for good weather this weekend so we can spray some epoxy primer on them and get these installed... And the last two pipe clamps came in at Napa (installed with lock nuts), so we can now throw some air to the planishing hammer and try out the new fixture.. __________________ Robert