|
Re: 69 C10 swb stepside project 45 ACP
Quote:
Originally Posted by imsuchaman55
When we put our caster/ camber gauge on it, which goes up to 8 degrees, it maxed out really quickly, I would guess its well over 8 degrees. Im sure your could take some out by shimming the top control arm though. The wheel sits really far back in the wheel well when they are mounted that way, and were really close to rubbing at full turn. A taller spindle should make a little bit better.
|
I figured it would probably have to be put back to stock orientation but I wanted to see what I ended up with to start with since the spindles are quite different.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
|