The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Sicklajoie · 04-07-2014, 08:03 PM

After 2 1/2 years I finally got around to putting Bilsteins on the 69er to replace the worn out Rancho shocks.
The rears did not have the steel sleeves in the rubber bushings so I took the ones off the old Rancho shocks and had to use a little persuasion to get them in.
I took the truck for a quick ride around town and was happy with the nice firm ride.
Fronts: http://www.summitracing.com/parts/bsn-24-192941
Rears: http://www.summitracing.com/parts/bsn-24-002486

04-07-2014, 08:03 PM	#1
Sicklajoie The Niner Join Date: Nov 2010 Location: Broad Brook, CT Posts: 2,489	Bilstein shocks for a C20 After 2 1/2 years I finally got around to putting Bilsteins on the 69er to replace the worn out Rancho shocks. The rears did not have the steel sleeves in the rubber bushings so I took the ones off the old Rancho shocks and had to use a little persuasion to get them in. I took the truck for a quick ride around town and was happy with the nice firm ride. Fronts: http://www.summitracing.com/parts/bsn-24-192941 Rears: http://www.summitracing.com/parts/bsn-24-002486 Attached Images __________________ "A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/