Quote:
Originally Posted by ultrahd4me
I'm fairly certain the earlier 80's A/C setup is a lot different than the late. You will need the later style drier without the tube on the bottom and the matching line set. I would recommend the APDI/Pro 7013642 condenser because its a perfect bolt in and also a parallel flow for 134. As you have found out, the spectra does not fit. If you are replacing the compressor and don't have it, there is a difference in coil position (9:00 or 12:00) and that also effects the compressor clutch and pulley. I hope this helps.
|
Do you know if all rad supports will support the condenser that exits out the passenger side? I assume pre 80 rad supports dont support this but Im not sure. I do already have the big compressor for the big block. Its new and I assume the hoses for the pancake style compressors would not work.
I see what you're saying with the dryer. Im just concerned I wont be able to make a later drier work if I have to use the hoses from an earlier style because of the condenser.. ugh.