The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - budget beater c10 to k30 swap over build.

sweetk30 · 01-17-2019, 10:34 PM

used dont know if it worked fuel pump on firewall = check

few hose clamps and filter with 3ft of hose = check

suck fuel up the 5/16" return line from the efi sender = check

used dont know condition 1411 edelbrock carb no choke hooked up = check

toggle switch under hood just for now to plow driveway = check

fire in the hole / runs o.k. / plow on and ready = check

now i recall why i dont like carb .

note : tbi senders from our square body trucks the return line goes to the bottom of the tank

so you can suck fuel up it

01-17-2019, 10:34 PM	#147
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: budget beater c10 to k30 swap over build. used dont know if it worked fuel pump on firewall = check few hose clamps and filter with 3ft of hose = check suck fuel up the 5/16" return line from the efi sender = check used dont know condition 1411 edelbrock carb no choke hooked up = check toggle switch under hood just for now to plow driveway = check fire in the hole / runs o.k. / plow on and ready = check now i recall why i dont like carb . note : tbi senders from our square body trucks the return line goes to the bottom of the tank so you can suck fuel up it Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.