[dennislbrooks]

Looks ike about all I got right was the 344. Looks like they may have been made 1 of 7 places.


Back to the 67 ---- unless you think bad I am using RCA splitters off the L/R rear low inputs instead of using the high inputs. I have found nothing that says I have to ground the amplifier case to ground ---is it necessary as it will be setting on noncut loop pile carpet under the seat --do not want to drill holes in floor. I can put short pointed bolt feet on it to keep it from moving. This would raise it a bit (1/2") to allow air under it also. I can run a ground from the case to the amplifier ground lug which is grounded to the body which is grounded to the engine /frame/battery.. Let me know.

Thank you for the help. Until I get the monoblock in I have the sub disconnected --- bummer --- once you hear the bass.