The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**rob32472** · 10-03-2012, 06:48 PM

The steering is good with no binding at all. I have driven it only around for a short drive. The steering is about 3.5 lock to lock. It appears to be equal both ways. I will post more as I drive.... Just a note the kit was designed with a stock application in mind so my steering shafts are a little different Due to the LS swap. The angles would not even be close using a stock set up they are right at 30 degrees for my application.

10-03-2012, 06:48 PM	#32
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,503	Re: Bolt on Rack and pinion The steering is good with no binding at all. I have driven it only around for a short drive. The steering is about 3.5 lock to lock. It appears to be equal both ways. I will post more as I drive.... Just a note the kit was designed with a stock application in mind so my steering shafts are a little different Due to the LS swap. The angles would not even be close using a stock set up they are right at 30 degrees for my application.