The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Superdave76 · 10-01-2017, 11:11 PM

I marked and drilled the new holes in the side and bottom of the frame. The pass side has the one hole that lines up with the 2wd crossmember. After all the holes were drilled I moved on to the idler arm bracket.

10-01-2017, 11:11 PM	#6
Superdave76 Registered User Join Date: Sep 2017 Location: Tyler, TX Posts: 22	Re: 1984 Jimmy 2wd conversion I marked and drilled the new holes in the side and bottom of the frame. The pass side has the one hole that lines up with the 2wd crossmember. After all the holes were drilled I moved on to the idler arm bracket. Attached Images