The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*YoungPup1977* · 04-07-2018, 07:42 PM

Once TCC solenoid is removed.
Remove the pump bolts. If you have the input sensor this will need to be disconnected prior to removing the pump.
Pump is ready to be removed from trans case.
To change out the output shaft the VB DOES NOT need to be removed from the Trans case.

Posted via Mobile Device

04-07-2018, 07:42 PM	#10
YoungPup1977 Account Suspended Join Date: Jun 2015 Location: No longer here Posts: 1,000	Once TCC solenoid is removed. Remove the pump bolts. If you have the input sensor this will need to be disconnected prior to removing the pump. Pump is ready to be removed from trans case. To change out the output shaft the VB DOES NOT need to be removed from the Trans case. Posted via Mobile Device Last edited by YoungPup1977; 04-14-2018 at 12:29 AM.