The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**buggy5872** · 02-20-2018, 04:25 PM

I used a dana 44 out of a 75 CJ5 jeep ($100 bucks). I put disc brakes on using Suzuki samari front rotors and Lincoln continental calipers. Might have $300 in it total. It is good for tires up to 18.5 wide that do not rub on the outer wheel well. You will need to make tubs for the inner wheel well. I made a 4 link set up but you can use the front spring hangers and put the springs inline under the frame rails to be able to use it on the cheap. The pic is with 15.5 wide tires

02-20-2018, 04:25 PM	#27
buggy5872 Senior Member Join Date: Jun 2011 Location: North Beaver TWP PA Posts: 833	Re: 57 Rear axle swap I used a dana 44 out of a 75 CJ5 jeep ($100 bucks). I put disc brakes on using Suzuki samari front rotors and Lincoln continental calipers. Might have $300 in it total. It is good for tires up to 18.5 wide that do not rub on the outer wheel well. You will need to make tubs for the inner wheel well. I made a 4 link set up but you can use the front spring hangers and put the springs inline under the frame rails to be able to use it on the cheap. The pic is with 15.5 wide tires __________________ ___________________________ 1959 Apache Short Fleetside, 1959 Apache NAPCO Long Stepside, 1957 3100 with 59 fleetside bed 1957 5700 LCF Crew Cab "Big Bertha",1959 GMC F370 1958 GMC 600, 1946 Chevy, 1959 Viking 60 LCF 1974 Elcamino SS, 1979 6500 GMC Tilt Bed Wrecker Big Bertha Build